howtouse.jpg (15292 bytes)

-Follow this link to a frames presentation on the Control Panel Screens in the room.

Please note that this will best be viewed if using Internet Explorer, version 5.0 or higher.

 

Troubleshooting Tips

 
Problem
Solution
Projector will
not turn on		 Confirm that there is power by seeing if there are lights illuminated on the projector. If the power and status light are lit on the projector, see if lamp replacement light is lit. If so, contact 621-3633.

If lamp replacement light is not lit, confirm that "Standby (Black)" button is not active on control panels (at podium). Cycle Projector Power On and Off buttons, and toggle Standby button.
Desktop computer will not display Make sure "Computer" is pressed on the left control panel.Check the black box next to the computer monitor so that the light is lit next to portable computer. Toggle button from portable computer to desktop computer.

Laptop computer will not display

Make sure "Computer" is pressed on the left control panel. Check the black box next to the computer monitor so that the light is lit next to desktop computer. Toggle button from portable computer to desktop computer.

Make sure that your laptop is sending a signal to the projector by locating the FUNCTION key on your laptop. It is marked FN and it’s text is usually tinted blue. Choose where your image is projected. While holding down the FN key, tap the laptop’s display key. This is usually F7 or F8 on your keyboard. It is also usually marked as “CRT/LCD”or has an icon resembling a TV set. Tapping this key will choose where the image is projected — On the laptop only, on the projection screen only, or on both. Wait 5 seconds after tapping this key to allow the computer to respond to the command.
Microphone volume is
too low		 Press Audience Cameras on the left control panel. On the right control panel adjust the "Volume for Mics" level. Check that the battery in the microphone is charged. Replace battery if necessary (replacements in black cabinet at podium).
Wolfvision light will not
come on		 Press Wolfvision on the left control panel. Tap "Camera On" button. Check power light on the Wolfvision unit. If green, toggle through light settings on the right control panel by pressing "Lights." This will toggle through the above light, the backlight, or turn off lights. Press button enough time to have toggled through the sequence. Check for messages displayed on the podium monitor. If lamps need replacing, call 621-3633

return home